Home

Cisco: Block Multicast on a Specific Port

Posted by SteveHardie | On: Feb 05 2016 | Comments (0)
Quick couple of lines to disable multicast traffic on a specific interface or port. interface GigabitEthernet1/0/1 switchport block multicast storm-control multicast level 0.00 ! The first command stops outbound multicasts from getting out. The secondcommand...

Cisco: Show System Uptime

Posted by SteveHardie | On: Nov 16 2015 | Comments (0)
To view the Uptime on your Cisco device, login to the device and run the following command: hostname# Show Version You will see the following result (Or similar): On some versions of iOS you may also be able to use the: Show System Uptime command

Cisco: Configure Login using Username and Password

Posted by SteveHardie | On: Jul 06 2015 | Comments (0)
This article will outline the steps and configuration required to configure username and password for a Cisco router or switch. This will use a locally stored username and password database for authentication when connecting to the device via Telnet or Console...

Cisco: 877W Configure Wireless and Wired on Single Subnet

Posted by SteveHardie | On: May 06 2013 | Comments (1)
This article will demonstrate how to configure a cisco router to allow the wireless and wired networks to communicate on the same vlan and subnet. IOS version: 12.4(15)T12 Router Model: Cisco 877W Router Series: Cisco 880 Series Integrated Services Routers

Cisco: Disconnect service-module session

Posted by SteveHardie | On: May 06 2013 | Comments (0)
I know this is a simple thing, but its one thats easy to forget, anf you can find yourself in a bit of a pickle. When you have entered a service-module session, for example connecting to an integrated access point, and you would like to disconnect and return back...